|
膠片系列
PLASTIC
SHEETS
LEXAN SHEET
南亞
薄膜系列
PLASTIC
FILMS
LEXAN FILMS
玻璃膠系列
SILICONE
SEALANT
天花板系列
CEILING
| |
[ 建築膠片 Architectural Plastic ] [ 工程塑膠 Engineering Plastic ] [ 工業膠板 Industrial Plastic ] [ 薄膜 Film ] [ 亞加力膠片 Acrylic Sheet ] [ 玻璃膠 / 化工原料 ] [ Other ] [ 工具軟件 ]
EXCELL - AMORPHOUS PET SHEETS
(APET)
 
- EXCELL Sheets are produced with
Saehan's advanced technology that has been accumulated following several decades in the
field of PET
- (Polyethylene-Terephthalate).
- EXCELL Amorphous PET Sheets have excellent mechanical, thermal, and chemical
properties.
|
ADVANTAGES AND CHARACTERISTICS OF EXCELL |
- Transparency : Suitable for containers requiring glass-like
transparendy, high surface polishing, and optical features, which add higher value to the
packaged products.
|
Suitability
for Food Contact :
Meets food hygiene regulations and therefore suitable for the food packaging industry. |
- Thermoforming
:
Excellent stiffness for a wide range fo temperatures. Economical and easy for the
design and molding for containers with low temperature impact resistance.
|
After
Processing :
Excellent color printing suitability and gamma ray sterilization make it highly suitable
for sterilized packaging Environmental
Friendliness : Recyclable, and low amount of combustion. There is no emission of noxious
gas in the event of combustion. |
| Chemical
Resistance :
Resistant to chemicals such as acids or alkalis and therefore suitable for the packaging
of foods, which contain such ingredients. |
Impact
Resistance :
Stronger impact resistance compared with other substitute materials. Suitable for
the packaging of the cold and frozen products due to low-temperature impact resistance. |
| Barrier
Properties :
Excellent for containing gas and oxygen, which results in the exceptional preservation of
flavour and fragrance. |
|
- Various applications of EXECLL
- For Food & Beverage :
- Cases and trays for
confectioneries, agriculture product,
water cups, containers, and ice cream lids
- For Industry :
- Trays and caps for electrical and
electronic products
and accessories (e.g. carrier tape, etc.), blisters for tools, batteries, and electric
wire coils, etc.
- For medical :
- Syringes and syringe containers, anti-virus
measuring instruments, Containers requiring gamma ray sterilization, Trays for medical
supplies, etc.
- Miscellaneous :
- Living
commodities (tooth brush, etc.), Stationery (pen, ruler, scissors, knife,etc.), Cosmetics
and air fresheners, Automobile supplies and accessories, Toys, clothing, golf products,
etc.
-
|
EXCELL®
TECHNICAL DATA
Item
|
Unit
|
A-PET
|
Density |
g/cm3 |
1.34 |
Specific
Heat |
cal/g℃ |
0.26 |
Thermal
Conduction |
kcal/mlic |
0.22 |
Softening
Temperature |
℃ |
77 |
Melting
Point |
℃ |
245 |
Crystallization
Temperature |
℃ |
160 |
Shrinkage
Ratio |
% |
0.8~1.2 |
Tensile
Strength(20℃) |
kg/cm2 |
560 |
Elasticity
Ratio |
kg/mm2 |
220 |
Break
Diagram |
% |
300 |
Barrier: |
|
|
N2 |
km2/m2 D bar |
1.5 |
O2 |
Cm2/m2 D bar |
9 |
CO2 |
Cm2/m2 D bar |
18 |
H2O |
G/m2 D |
1.3 ~ 1.5 |
Deep
Thermoformation |
|
Suitable |
Compression
Air Formation |
|
Suitable |
Vacuum
Formation |
|
Suitable |
Thermoformation
Temperature |
|
120~130 |
Printing |
|
Good |
Barrier
characteristics |
|
Good |
Freezing
package |
|
Possible |
Coloring |
|
Possible |
EXCELL®
PRODUCT RANGE
ROLL TYPE
|
FLAT TYPE
|
GRADES
AVAILABLE |
Thickness (mm) |
Length (mm) |
Width(mm) |
Thickness(mm) |
Size(mm) |
|
0.15
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
1.10
1.20 |
1,700
1,500
1,100
800
600
500
400
400
350
350
300
300 |
1,460
1,300
1,200
1,100
750
650 |
0.20
0.30
0.40
0.50
0.60
0.70
0.80 |
670
X
1,460
800
X
1,100 |
General
use
Anti-Static
Slip Improved
Anti-Fog
Forming Improved
Adhesion Improved
Color Products |
|
